I’m a homeowner in North Richland Hills, TX, and I hired Johnston Renovations for bathtub resurfacing. The entire process took one day to complete, with another 24–48 hours for the coating to fully cure. My old, worn tub now looks brand new again, and I didn’t have to go through a full bathroom remodel.
My Bathtub Looked Worn and Outdated
Like many homes in North Richland Hills, mine was built more than a decade ago. The bathroom still had its original fixtures, and while everything worked fine, it no longer looked appealing. The white porcelain tub had turned slightly yellow, and the surface felt rough no matter how much I cleaned it. Small scratches and stains near the drain were impossible to scrub away.
Replacing it seemed overwhelming. Between removing the old tub, repairing walls, and reinstalling plumbing, the cost and time commitment felt excessive. I wanted a cleaner, brighter bathroom without turning it into a major renovation project.
That’s when I reached out to Johnston Renovations. The team came out to inspect my tub and confirmed it was a perfect candidate for resurfacing because the structure was still solid; it just needed a new surface.
What Happens During Bathtub Resurfacing?
Before starting, the team walked me through every step of the resurfacing process so I’d know exactly what to expect. The process sounded straightforward, but I was surprised by how detailed and careful the team was during the work.
1. Preparation and Cleaning
The team began by cleaning the tub with an industrial cleaner that stripped away all soap residue, body oils, and mineral buildup. They taped plastic around nearby tiles and flooring to keep the work area clean. Even though it’s a messy process, they kept everything contained.
2. Repairing the Surface
Once the tub was dry, the team filled in any small chips or cracks with a bonding compound. This step is what makes the final finish smooth and flawless. My tub had a few minor dings from years of use, but once the filler dried, it looked perfectly level.
3. Sanding and Etching
After repairs, the team sanded down the entire surface to remove the old coating. Then they applied an etching solution that helped the new finish adhere tightly. The room smelled a bit like paint, but proper ventilation and fans kept the air circulating.
4. Applying the Primer and Coating
Next came the primer and topcoat. The team used a spray system that created an even, glossy surface. It looked like brand-new porcelain when they were done. Several thin layers were applied, with time to set between each, for a smooth, professional finish.
5. Drying and Curing
Finally, the team cleaned up the area and explained that the coating would need about 24 to 48 hours to fully cure. They recommended waiting two full days before using the tub to let the surface harden completely.
The entire on-site work took about six hours. By that evening, my bathroom already looked refreshed.
How Long Does Bathtub Resurfacing Take from Start to Finish?
Resurfacing a bathtub doesn’t take long, which was a huge relief. The team arrived in the morning and finished before dinner. Compared to tearing out and replacing a bathtub, which could take weeks and cost thousands of dollars, resurfacing felt like an easy win.
Here’s how the timeline broke down:
- Surface preparation and repair: 1–2 hours
- Sanding and cleaning: 1 hour
- Priming and coating application: 2–3 hours
- Curing time: 24–48 hours before use
Even with the curing period, I could start using my tub again in two days. The process fit perfectly into a normal week without disrupting my routine.
How Much Does Bathtub Resurfacing Cost in North Richland Hills, TX?
The team gave me a clear, upfront estimate before starting. Most bathtub resurfacing jobs in North Richland Hills fall between $350 and $600, depending on the tub’s size and condition. My tub was a standard porcelain model, so it came in on the lower end of that range.
A full bathtub replacement in the Dallas–Fort Worth area can easily run between $1,500 and $3,000 after factoring in demolition, plumbing, and tile repair. For me, resurfacing made much more sense. I got the same bright, smooth look without the extra cost or mess.
Why Bathtub Resurfacing Was the Right Choice for Me
North Richland Hills has a lot of well-built homes where the main issue isn’t the structure, but the appearance of older finishes. That was exactly my situation. Resurfacing gave me the results I wanted quickly and affordably.
I also appreciated how carefully the team worked. They used drop cloths, wore shoe covers, and made sure no residue was left behind. The finished surface looked flawless, with a smooth shine that made the entire bathroom feel newer.
Since the job happened in November, the cooler temperatures actually helped with curing. Unlike the humid summer months in North Texas, the mild fall air allowed the coating to dry evenly without any bubbles or streaks.
Now, every time I walk into my bathroom, it feels like a fresh space again. The light reflects off the tub just like it did when the house was new.
Why Choose Johnston Renovations in North Richland Hills, TX
After my experience, I can confidently say that Johnston Renovations is one of the most reliable remodeling companies in the area. The team takes pride in their work and makes sure each project is done right the first time.
Their attention to detail sets them apart. From clear communication to quality materials, everything was handled professionally. The team personally checked in before and after the job, answering all my questions about cleaning and maintenance.
They don’t just specialize in resurfacing; they also handle bathroom remodeling and flooring installation across the Dallas–Fort Worth area. So if you decide to take your renovation a step further, you’re already working with a team that understands your space and your goals.
What stood out most was how easy the process felt. Renovations can be stressful, but the team worked quickly and treated my home with respect. They arrived on time, cleaned up thoroughly, and kept me updated at every stage.
Request a Quote Today!
If you live in North Richland Hills, TX, and your bathtub looks dull, scratched, or outdated, Johnston Renovations can help. Their bathtub resurfacing service offers a fast, affordable way to refresh your bathroom without a complete remodel.
You can contact the team directly at (682) 356-3063 or email mark@dfw-renovations.com to request a quote today.
A smooth, polished tub can completely change how your bathroom feels, and you don’t need weeks of construction to get it. Johnston Renovations makes the process simple, clean, and efficient from start to finish.
Your dream bathroom might be closer than you think.
1 Comment
Jorge Munoz
Excellent quality and price, and very friendly and attentive staff. 😍